Skip to content

Battery Safety & Maintenance

Keep the hazards to a minimum with our battery safety and maintenance products.

Battery Safety & Maintenance

We help keep your battery charging stations and the personnel that work around them healthy and safe with the proper tools; items like Battery Handling Systems’ battery spill kits, watering devices, or monitoring equipment assist in precluding any mishaps when servicing or changing out a battery.

In addition, we also offer eye & safety stations, battery lifting devices, and more to avoid unnecessary involvement with cumbersome, highly explosive, or noxious materials.

Hardwood Wash Station

BATTERY HANDLING SYSTEMS
The BHS Hardwood Wash Station helps keep your industrial batteries clean. The HWS is available with wood or plastic decking. Ideal for use with the BHS Recirculation Neutralization System (RNS). Available in stainless steel. 12" deck height standard.

Roller Wash Station

BATTERY HANDLING SYSTEMS
The BHS Roller Wash Station helps keep your industrial batteries clean. The RWS comes standard with polyethylene rollers for corrosion resistance. Ideal for use with the BHS Recirculation/Neutralization System (RNS). Available in stainless steel. 12" roller height standard. Use Suffix -14 for roller heights over 14".

Recirculation/Neutralization System 1

BATTERY HANDLING SYSTEMS
The RNS-1 comes standard with a 110 gallon polyethylene tank, a spray wand with 10 foot hose , and a 12V sump pump with float switch. Note: Voltages available in 120 & 240 1ph or 240 & 480 3ph 60HZ. Note: Contact Factory for other voltages and frequencies.

Recirculation/Neutralization System 3-SS

BATTERY HANDLING SYSTEMS
The RNS-3-SS comes standard with a 200 gallon tank, a spray wand with 10 foot hose, and a 12V sump pump with float switch. Note: 120/1pH/60/Hz only. Contact Factory for other voltages and frequencies.

Recirculation/Neutralization System 4-SS

BATTERY HANDLING SYSTEMS
The RNS-4-SS comes standard with a 200 gallon tank, a spray wand with 10 foot hose and a 12V sump pump with float switch. Note: 120/1pH/60Hz only. Contact factory for other voltages and frequencies.

Battery Wash Cabinets

BATTERY HANDLING SYSTEMS
This Battery Wash Cabinet is equipped with manual door and gravity feed rollers. The BWC-1 utilizes 120 volt single phase power with adjustable timer and allows batteries to drip dry. Note: Contact Factory for other voltages and frequencies.

Battery Wash Cabinets 2

BATTERY HANDLING SYSTEMS
This Battery Wash Cabinet is equipped with an air operated automatic door and powered rollers for convenience. The BWC-2 utilizes 240/480 volt 3 phase power. Automatic air blow-off removes excess water. Note: Contact Factory for other voltages and frequencies.

Battery Wash Cabinets 3

BATTERY HANDLING SYSTEMS
This Battery Wash Cabinet is built with an in feed conveyor for overhead loading and utilizes 240/480 volt 3 phase power. The BWC-3 is equipped with an automatic air blow-off and also indexes at the end of evey cycle. Note: Contact Factory for other voltages and frequencies.